加载中···

气化维修机械工程师 11k~12k

学历不限 经验不限 内蒙古-呼和浩特市

更新时间: 2021-12-30

空气化工产品(中国)投资有限公司
外商独资 1000人以上

职位要求

招聘日期: 2021-01-19 ~ 2022-01-01

职位描述

PRINCIPAL ACCOUNTABILITIES(主要职责)

Ensure to comply with AP and local safety, health and environment standard, fulfill the mandatory safety requirement and activities: safety training, safety meeting, Basic Safety Practices and all other requirements by AP EH&S and local regulation.

确保遵守美联社和当地的安全、健康和环境标准,满足强制性的安全要求和活动:安全培训、安全会议、基本安全实践和所有其他需求由美联社、健康和当地法规。

Monitor the serviceability of plant equipment and facilities and ensure they adhere to safety, housekeeping and environmental requirements.

监控工厂设备和设施的服务能力,确保他们遵守安全、管理和环境的要求。

Responsible for the maintenance of all pressure vessels, tanks, relief valves, exchangers, pipe line, flare detections, life support system, critical safety system and all types of rotating equipment (Pumps, turbines and compressors, Coal Millersetc) and other mechanical system.

负责维护所有压力容器、罐、安全阀,换热器,管道,光谱检测、生命维持系统,关键安全系统和各类转动设备(水泵、发电机和压缩机,煤炭磨)和其他机械系统。

Support in inspection planning, code design, regulatory compliance, quality control standard, equipment repair, and fitness for service.

支持检验计划、代码设计、法规遵从性、质量控制标准,设备维修和适当的服务。

Support to develop Inspection Planning and Repair Procedures.

支持制定检查计划和维修程序。

Interpretation of corporate standards as well as “recognized and generally accepted good engineering practices” such as ASME and GB Codes and API Documents to site.

解释公司的标准以及“公认和普遍接受良好的工程实践”如ASME和GB码和API文档。

Performing equipment design, inspection, fitness for service evaluations and failure analysis for mechanical integrity system Development and updating of corporate standards

执行设备的设计、检验、适当服务评估和失效分析的机械完整性系统发展和更新的企业标准

Implement and manage engineering requirements to satisfy equipment selection, maintenance and reliability initiatives

实施和管理工程需求,以满足设备选择、维护和可靠性措施

Inspect Pressure Systems (including Pressure Vessels, Heat Exchangers, Fired Heaters, Reformers, Storage Tanks, furnace, Piping) during plant outages / normal operation and evaluate results for recommend repair, Input for development and maintenance of Pressure System standards, procedures, best practices, inspection contracts and contractor service.

检查压力系统(包括压力容器、热交换器、加热器,改革者,储罐,炉、管道)在植物中断/正常操作和评估结果建议修复,输入压力系统开发和维护的标准、程序、最佳实践、检验服务合同和承包商

Response to maintenance requirements that could be scheduled or unscheduled/emergency jobs, on 24/7 base, prompt response to requests for assistance and putting in the time and effort to meet our customer’s expectations.

响应维护需求,可以计划内或计划外/紧急工作,在24/7的基础上,及时响应请求援助和投入时间和精力来满足客户的期望。

To be familiar with all equipment in Gasification Facility, maintain all mechanical equipment accurate documents integrity and equipment history database reachable.

熟悉所有设备在气化设备,维护所有机械设备准确文件完整性和设备历史数据库访问。

  

Provide hand-on technical skills at the troubleshooting and all related maintenance work or supporting work responsible.

提供手把手技术在故障诊断和所有相关的维护工作或支持工作负责。

Perform preventive maintenance work and support to implement Mechanical Integrity work and tasks, troubleshooting, repair for all responsibly equipment.

执行预防性维护工作和支持来实现机械完整性的工作和任务,为所有负责任的故障诊断、维修设备。

Coordinate or assist of supervision the contractor’s work in the facility or shop to guarantee safety and quality and reliability.

协调和协助监督承包商的工作在工厂或商店保证安全和质量和可靠性。

Continually to drive productivity and cost savings and enhancement through improved work process and equipment performance. Initiate and Implement continuous improvement saving projects.

不断提高生产率和节约成本和增强通过改进工作流程和设备性能。发起和实施持续改进节约项目。

Reporting-Time entry weekly, and prepare technical reports either written or through entries into the resource management system to maintain accurate documentations on the Gasification facility, and to provide information for others in the organization to carry out their responsibilities effectively.

每周报表时间条目,并且准备技术报告书面或通过条目进入资源管理系统维护准确的文件在气化设备,并为他人提供信息组织中有效地履行职责。

Provide mechanical system diagnostics services in troubleshooting and resolving machinery issues using vibration diagnostics tools and failure analysis techniques. This includes issuing failure analysis reports and cost effective recommendations for reliability improvements.

提供机械系统故障排除和诊断服务使用振动诊断工具解决机械问题和失效分析技术。这包括发布失效分析报告和成本有效的可靠性的改进建议。

Develop mechanical equipment job-packs for major overhauls and repair.

为重大改革和开发机械设备job-packs修复。

Initiate and implement reliability and/or efficiency improvement initiatives and best practices on operating machinery and focus on CoNC(cost of non-compliance)

   启动和实施可靠性和/或效率改进计划和最佳实践操作机械,专注于浓缩的成本(不符合)

Provide installation and commission support for new large machinery [eg. Compressors, turbines.]

   提供安装和调试支持新的大型机械(如。压缩机,透平机。)

Participate in the planning and execution of minor and major shutdowns. Provide technical and hands on support as required during shutdowns.

   参与规划和执行的轻度和重度关闭。提供所需的技术和手在支持期间关闭。

Spare parts inventory review and parts purchasing support technically, effort in plant reliability improvement.

备件库存检查和部分采购技术支持,努力在植物可靠性改进。

Keep abreast of and evaluate new methodologies, work practices, for application and use within the plant.

了解和评价新方法、工作实践,对应用程序和使用在工厂。

Assist in the development, implementation, and periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve Gasification Facility on stream capability.

协助开发、实现和定期检查预防/预测性维护计划减少意外关闭,提高气化设施在线率。

Execute the preventive maintenance tasks

执行预防性维修任务。

JOB REQUIREMENTS(岗位要求)

1.   Be honest and responsible

诚实和负责任

2.   Educational: Diploma or higher education holder in Mechanical/Machinery Engineering.

教育:高等教育文凭或在机械/机械工程。

3.   Working Experience: The minimum requirements for the machinery/mechanical engineer’s position are 5+ years’ experience in Pulverization Coal Gasification Facility mechanical maintenance experiences, especially 5+ years’ experience in AP Gasification Facility mechanical maintenance experiences. Desirable to have Piping stress analysis experience.

工作经验:最低要求的机械/机械工程师的职位5年以上的经验,粉碎煤气化设备机械维护经验,尤其是5+年的经验在AP煤气化设备机械维护经验。理想的管道应力分析的经验。

4.   The engineer should be familiar with basic math, precision measuring, and materials of mechanical.

工程师应该熟悉基本的数学、精密测量、机械和材料。

5.   Possess good oral and written communication skills, preferable with English language.

具有良好的口头和书面沟通能力,更好的英语。

6.   Able to work independently as well as in a team player.

能够独立工作以及团队合作精神。

7.   Basic office software operation.

基本的办公软件操作

8.   Strong safety awareness.

较强的安全意识.