加载中···

机械维修工程师 8k~12k

大专及以上 五年以上 河北-沧州市

更新时间: 2022-01-17

空气化工产品(中国)投资有限公司
外商独资 1000人以上

职位要求

招聘日期: 2021-03-29 ~ 2022-08-05

职位描述

At Air Products, we work in an environment where diversity is essential, inclusion is our culture, and each person knows they belong and matter.

PRINCIPAL ACCOUNTABILITIES
主要岗位职责

Ensure to comply with AP and local safety, health and environment standard, fulfill the mandatory safety requirement and activities: safety training, safety meeting, BSP (APT, JSA etc.) and all other requirements by AP EH&S and local regulation.

确保遵守AP和当地的安全、健康和环境标准,完成强制性的安全要求和活动:安全培训,安全会议,BSP (APT, JSA等)和AP EH&S和当地法规的所有其他要求。

Monitor the serviceability of plant equipment and facilities and ensure they adhere to safety, housekeeping and environmental requirements.

监督工厂设备和设施的使用能力,确保它们符合安全,清洁和环境要求。

Responsible for the maintenance of all pressure vessels, tanks, relief valves, exchangers, pipe line, life support system, critical safety system and other mechanical system.

负责所有压力容器、储罐、溢流阀、换热器、管线、生命保障系统、关键安全系统等机械系统的维护。

Support in inspection planning, regulatory compliance, quality control standard, equipment repair, and fitness for service.

支持检查计划,法规遵循,质量控制标准,设备维修和服务的适用性。

Support to develop Inspection Planning and Repair Procedure under the guidance from PSM and MIQA manuals

在PSM和MIQA手册的指导下,支持制定检查计划和维修程序

Interpretation of corporate standards as well as “recognized and generally accepted good engineering practices” such as ASME and GB Codes and API Documents to sites.

向现场解释企业标准以及“公认和普遍接受的良好工程规范”,如ASME和GB规范和API文件。

Performing equipment design, inspection, fitness for service evaluations and failure analysis for mechanical integrity system Development and updating of corporate standards

为机械完整性系统的开发和公司标准的更新执行设备设计,检查,服务评估和失效分析

Implement and manage engineering requirements to satisfy equipment ion, maintenance and reliability initiatives

实施和管理工程要求,以满足设备选型、维护和可靠性的要求

Inspect Pressure Systems (including Pressure Vessels, Heat Exchangers, Storage Tanks, Piping) during plant outages / normal operation and evaluate results for recommend repair, Input for development and maintenance of Pressure System standards, procedures, best practices

在工厂故障/正常运行期间检查压力系统(包括压力容器,热交换器,储罐,熔炉,管道),并评估结果,参与开发和维护压力系统标准,程序,最优实践。

Response to maintenance requirements that could be scheduled or unscheduled/emergency jobs, on 24/7 base, prompt response to requests for assistance and putting in the time and effort to meet our customer’s expectations.

对计划内或计划外/紧急工作的维护做出全天侯响应,迅速响应,并投入时间和精力以满足客户的期望。

To be familiar with all equipment in plants, maintain all mechanical equipment accurate documents integrity and equipment history reachable.

熟悉工厂所有设备,保持所有机械设备文件准确完整,以及设备历史数据库的维护。

Provide hand-on technical skills at the troubleshooting and all related maintenance work or supporting work responsible.

在故障排除和所有相关的维护或支持工作中提供实际的技术技能。

Perform preventive maintenance work and support to implement MI work, such as SAP PM01-03 tasks, troubleshooting, repair for all responsibly equipment.

执行预防性维修工作,并支持执行MI工作,如SAP系统中的 日常性维修,预防性维修及大修等任务,故障排除,维修所有负责的设备。

Coordinate or assist of supervision the contractor’s work in the facility or shop to guarantee safety and quality and reliability.

协调或协助监督承包商在工厂或车间的工作,以保证安全、质量和可靠性。

Continually to drive productivity and cost savings and enhancement through improved work process and equipment performance. Initiate and Implement CI (continuous improvement) saving projects.

通过改进工作流程和设备性能,不断提高生产率和成本节约。发起和实施持续改进的节约项目。

Reporting-Time entry weekly, and prepare technical reports either written or through entries into the resource management system to maintain accurate documentations on the plants, and to provide information for others in the organization to carry out their responsibilities effectively.

每周按时汇报,准备书面或资源管理系统录入的技术报告,以保持工厂的准确文件,并为组织内的其他人有效地履行其职责提供信息。

Provide mechanical system diagnostics services in troubleshooting and resolving machinery issues using vibration diagnostics tools and failure analysis techniques. This includes issuing failure analysis reports and cost effective recommendations for reliability improvements.

提供机械系统诊断服务,使用振动诊断工具和故障分析技术解决机械问题。这包括发布故障分析报告和提高可靠性的成本效益建议。

Develop mechanical equipment job-packs for major overhauls and repair.

制定机械设备大修维修包。

Initiate and implement reliability and/or efficiency improvement initiatives and best practices on operating machinery and focus on CoNC

发起和实施设备的可靠性/效率改进计划/最优实践,并关注CoNC

Provide installation and commission support for new large machinery [e.g. Compressors, turbines.

为新项目大型机械提供安装和调试支持。例如:压缩机,透平机。

Participate in the planning and execution of minor and major shutdowns. Provide technical and hands on support as required during shutdowns.

参与和执行工厂检修计划。在检修或停车期间提供必要的技术支持。

Spare parts inventory review and parts purchasing support technically, effort in plant reliability improvement.

备件库存审查和采购技术支持,努力提高工厂的可靠性。

Keep abreast of and evaluate new methodologies, work practices, for application and use within the plant.

了解并评估新方法,工作实践,在工厂内的应用和使用。

Assist in the development, implementation, and periodic review of preventative/predictive maintenance programs to reduce unplanned shutdowns and improve overall plant on stream capability.

协助开发、实施和定期审查预防性/预测性维护计划,以减少计划外停机,提高工厂的整体生产能力。

Business travel within region is required based on the actual need.

根据实际需要,安排区域内出差。

JOB REQUIREMENTS
岗位要求

Be honest and responsible

诚实负责

Educational: colleague or higher education holder in Mechanical/Machinery Engineering.

教育背景:机械或机械工程专业本科或以上学历。

· Working Experience: The minimum requirements for the machinery/mechanical engineer’s position are 5 years experience in pressure vessel, tank, pipeline and welding techniques. Desirable to have Piping stress analysis experience.

工作经验:机械/机械工程师职位的最低要求是5年压力容器、储罐、管道和焊接技术经验。有管道应力分析经验者优先。

The engineer should be familiar with basic math, precision measuring, and materials of mechanical.

工程师应熟悉机械的基本数学计算、精密测量和材料。

Possess good oral and written communication skills, preferable with English language.

具备良好的口头和书面沟通能力,英语流利者优先。

Able to work independently as well as in a team player.

能够独立工作和团队合作。

Basic office software operation.

基本的办公软件操作。


同时欢迎通过空气产品公司Airproducts官网的职业中心投递简历。职位代码:35434BR。